OSU RHR設備

FAR第25部分App F第IV部分，BSS 7322，AITM 2.0006

該FAA OSU RHR散熱裝置速率可評估飛機內部材料的散熱性能。 這些儀器由FAA單獨檢查，以確保符合FAA的製造要求。 設備隨附了FAA的合格證明。

規格與功能

• 全不銹鋼結構

• 具有FAA檢驗證書的測試設備

• 2個樣品架

• 廣泛的控制面板

• 帶有中心和角落感應器的校正裝置

• 用於校正的流量控制器

• 數據採集系統

• 帶有已安裝軟件的Windows筆記型電腦，可自動運行校準併計算測試結果

• 可選的濕式測試儀，用於甲烷流量校準

技術數據

電氣：主機架（包括加熱元件）：208-220V，單相，50 / 60Hz，50 amps

氣源組件：127-220V，三相，50Hz，30 amps / 120-208V，

三相，60Hz，30A

環境溫度：工作溫度10°C至35°C

儀器尺寸：1550mm（寬）x 700mm（深）x 2110mm（高）

所需服務

供氣：純度為99％的商業甲烷

氣源（如果客戶提供）：清潔，乾燥和過濾後的空氣，流速為0.05立方米/秒。 氣溫為21-24°C

OSU RHR Apparatus

FAR Part 25 App F Part IV, BSS 7322, AITM 2.0006

This FAA OSU RHR Rate of Heat Release Apparatus evaluates the heat release performance of aircraft interior materials.  These instruments are individually inspected by the FAA for compliance to the manufacturing requirements of the FAA.  A conformance certificate from the FAA is included with the equipment.

This FAA OSU RHR Rate of Heat Release Apparatus evaluates the heat release performance of aircraft interior materials.  These instruments are individually inspected by the FAA for compliance to the manufacturing requirements of the FAA.  A conformance certificate from the FAA is included with the equipment.

Download PDF Spec

Specification & Features

•All stainless steel construction

•Test Equipment with FAA inspection certificate

•2 Specimen Holders

•Extensive control panel

•Calibration rig with centre and corner transducers

•Mass flow controller for calibration

•Data acquisition system

•Windows Laptop with installed software to automatically run calibration & calculate test results

•Optional wet test meter for methane flow calibrations

TECHNICAL DATA

Electrical:

Main Frame (including heating elements): 208-220V, single phase,

50/60Hz, 50 amps

Air Supply Assembly: 127-220V, 3 phase, 50Hz, 30 amps /120-208V,

3 phase, 60Hz, 30 amps

Ambient Temperature:

Operating 10°C to 35°C

Apparatus Dimensions:

1550mm(w) x 700mm (d) x 2110mm (h)

SERVICES REQUIRED

Gas Supply:

Commercial methane with a purity of 99%

Air Supply (if customer supply):

Clean, dry and filtered air at a flowrate of 0.05m3/sec. Air temperature to be 21 - 24°C