大台北尖端儀器有限公司

TOMY CAX-571 落地型 多用途高速冷凍離心機

TOMY CAX-571

落地型 多用途高速冷凍離心機

Hybrid Refrigerated Centrifuge

廠牌:TOMY 日本
供應商:智勤企業有限公司(超低溫冷凍櫃/生物安全櫃/離心機/滅菌鍋/CO2,O2培養箱/化學工作台)
聯絡電話:02-23955078 07-3451553
定價:與我們聯絡

相關網頁

快速詢價

24103

行動條碼QR Code
落地型 多用途高速冷凍離心機-行動條碼QR Code

             

HYBRID REFRIGERATED CENTRIFUGE

All in one unit from micro tube rotors to multi-place swing rotors.
CAX-571, a high-performance refrigerated centrifuge that combines functions of high speed micro centrifuge and versatile low speed centrifuge into one compact model, meets a wide range of applications.

ECO mode to realize an up to approximately 24% duling the wating time.

[ECO] modo Electric power saving

Activating the power-saving [ECO] mode can also help reduce the power consumption during the waiting time (standby cooling) by allowing the temperature control bands to be changed.The chamber can cool down to the set temperature within approximately 3 minutes (*2) after release from ECO mode.

*2 Under the conditions: set temperature of 4℃ at an ambient temperature of 25℃.

 

 

Power consumption at ECO mode

  • Measurement conditions: Set to 4℃ at an ambient temperature of 25℃ while centrifugation is stopped. 
    (Rotors in use: CAX-571: TS-7C+7215-06)
  • The values shown above are average values obtained by measuring the units.

Flexibility

Three-step acceleration and three-step and natural deceleration

Initial values for acceleration and deceleration characteristics are set from 0 to 500rpm, however, they can be varied up to maximum speed in 100rpm increments by function settings.

 

From micro tubes to 250ml bottles

CAX-571, with the ability to accommodate micro tubes to 250ml bottles or deep well plates, is ideal for wide range of applications. Using an optional bucket cap kit B433HS*, various types of rotors including swinging bucket rotors of biohazard-proof can be mounted.

Convenient flashing function

Convenient flashing function allows operation with preset centrifuging conditions.

 

*Bucket cap kit B433 is an optional kit.
HS This highly sealed rotor, which has been tested and certified by the Health Protection Agency (HPA, UK) to be compliant with the International Standard (Annex AA of the IEC 61010-2-020), meets requirements for biohazard safety. [Bucket cap kit B433] is an optional kit.

Compact Design

Compact design for minimum space requirement

設計With its compact design of 462mm width and 542mm depth it is ideally suited to applications where space is limited.

 

Easy to see and operate control panel

1.
Easy-to-see LCD monitor display shows various information including remaining run time, error messages, rotor types in use and records of centrifugal operation. The monitor can display in English or Japanese.

 
*Indication displays on the control panel in the photo is different from displays of actual operation.

2.
Dual color LED display allows the user to monitor the operation status just by looking the display; red indicates that the rotor is spinning while green indicates the rotor is stopped.

3.
Popular user-friendly Jog Dial equipped with an button on top enables setting to be changed quickly and more surely.

 

Safety & Convenience

Flex-Spin system for safer and more efficient operation

Innovative Flex-Spin system employed to maintain safe and efficient centrifugal operation allows a margin of error and eye-balancing of sample tubes.
*Some rotors are excepted.

 
  • CAX-571 is equipped with a function to automatically reduce the rotation speed and shut the system down if it is being run over the imbalance tolerance limit.
  • Non-chlorine, ozone-friendly refrigeration medium which has zero ozone layer destruction coefficients is adopted.

Flex-Spin Drive

The Flex-Spin Drive features a flexible motor shaft that equalizes minor imbalances without damaging the centrifuge or triggering the imbalance protection system. This allows excellent tolerance for minor differences in sample volumes.

One-push rotor locking knob

With a single knob push, the rotor can be quickly and securely fixed.
*Some rotors are excepted.

Specifications

Model CAX-571
Maximum Speed 15,000rpm
Maximum RCF 21,130G
Maximum Capacity 1,000ml (250ml x 4)
Control System Microprocessor control (feedback system)
Drive Motor Induction motor
Drive System Flex-Spin drive system (Direct drive with an automatic alignment function)
Data Entry Jog Dial
Temperature Setting Range From -9℃ to +35℃ (1℃ increments)
Speed Setting Range 100 to 15,000rpm (100rpm increments)
RCF Setting Range 10 to 21,130G
(10G increments for the range less than 300G,100G increments for the range over 300G)
Time Setting Range From 10 sec to 50 sec, in 10 sec increments, from 1 min to 99 min, in 1 min increment or for free
Safety Devices • Imbalance detector, • Lid interlock, • Lid open/close detector,
• Abnormal speed detector, • Over-current circuit breaker,
• Rotor identification system, • Motor over-current detector,
• Abnormally high or low chamber temperature detector.
Additional Functions • Three-step acceleration characteristics selection, • Three memory function,
• Three-step deceleration characteristics selection,
• FLASH (momentary spin) function,
• BART Code selection, • Power saving (ECO) mode.
• Memory function for last run parameters.
Refrigerant HFC R404A (250g)
Rated Voltage AC220/230/240V
Rated Current 220/230/240V : 6.5A
Power Requirements Single phase 50/60Hz, AC220/230/240V 8A
Power Consumption(Heat output) 990W (851kcal/h)
Breaker Rated breaking current 220/230/240V : 7.5A
Protection Against Electric Shock Class I
Dimensions
(except protruding portion)
462W x 542D x 884H mm, (table height; 776mm)
Net Weight 124kg (220/230/240V)
Environmental Requirements Ambient temperature range:10 to 35℃, Relative humidity:30 to 85%, 
Atmospheric pressure:700 to 1,060hPa
Intended exclusively for use indoors, Overvoltage category: II, Pollution degree: 2
Accessories Included • Operator's manual 1, • Warranty Card 1, • BART Cord table 1,
• Clear storage case for operator's manual 1,
• Attaching screw for clear storage case 1, • Spanner 1, • Leveler gauge 1,
• Rotor locking knob 1, • Drain plug 1, • Power cord 1

* Specifications and design are subject to change for improvement without prior notice. Please ask for the latest specifications prior to your order and procurement.

連結原廠

http://www.digital-biology.co.jp/manufactured/products/cax/

您也可能對以下商品有興趣...

產品關鍵字:

大台北尖端儀器有限公司

最新廠商動態!

OMEGA ENGINEERING ;OMEGA代理;熱電偶接頭;熱電偶線;感溫線;偉吉達;
WHATMAN代理空氣採樣濾紙;玻璃纖維濾紙;G/A GF/B GF/C暨相關過濾素材; 2020 Cytiva代理Whatman濾膜及耗材;
不銹鋼三層推車;不銹鋼二層推車;實驗室推車;歡迎同業洽詢;
BROOKS質量流量控制器;PC540;BROOKS代理;質量流量控制器;BROOKS 5850E;
OMEGA ENGINEERING ;OMEGA 代理商;熱電偶接頭;熱電偶導線;熱電偶公母接頭;熱電偶感溫線;

更多

最新儀器!

山瑞科學有限公司

Copyright © 2006-2017 tw17 All rights reserved.
Design: 台灣儀器網

台灣儀器網Tw17 行動條碼QR Code