Model	Order No.	Channels	Flow rates ml/ min per channel	Dimensions		Weight
				D x W x H (mm)	D x W x H (inches)	kg	lb
IPC 4	ISM 930	4	0.002 – 44	180 x 175 x 130	7 1/16 x 6 7/8 x 5 1/8	4.6	10
IPC 8	ISM 931	8		220 x 175 x 130	8 2/3 x 6 7/8 x 5 1/8	5.1	12
IPC 12	ISM 932	12		260 x 175 x 130	10¼ x 6 7/8 x 5 1/8	5.8	13
IPC 16	ISM 933	16		300 x 175 x 130	11 7/8 x 6 7/8 x 5 1/8	6.5	15
IPC 24	ISM 934	24		380 x 175 x 130	15 x 6 7/8 x 5 1/8	7.9	18

IPC-N 4	ISM 935	4	0.0004 – 11	180 x 175 x 130	7 1/16 x 6 7/8 x 5 1/8	4.6	10
IPC-N 8	ISM 936	8		220 x 175 x 130	8 2/3 x 6 7/8 x 5 1/8	5.1	12
IPC-N 12	ISM 937	12		260 x 175 x 130	10¼ x 6 7/8 x 5 1/8	5.8	13
IPC-N 16	ISM 938	16		300 x 175 x 130	11 7/8 x 6 7/8 x 5 1/8	6.5	15
IPC-N 24	ISM 939	24		380 x 175 x 130	15 x 6 7/8 x 5 1/8	7.9	18

Specifications:
Characteristics	- microprocessor controlled - planetary drive with 8 actively driven stainless steel rollers - low pulsation - high repeatability on all channels - paint finished stainless steel housings
Tubing type	2-stop color-coded tubing, 0.13 – 3.17 mm i.d.
Tube-bed	- CA Click'n'go cassettes - simple handling - automatic occlusion setting - defined and reproducible occlusion conditions - each channel allows individual tubing selection
Operating panel	- 6-button membrane key-pad - LED display - MAX key for fast filling or emptying the tubing system
Operating modes	- pumping by drive speed (in %) - pumping by flow rate (ml/min) - factory-set flow rates for all available tube sizes - dispensing by volume (ml) - dispensing by time (0.1s up to 999hrs) - dispensing by volume within a pre-set time - interval dispensing by volume with a pause - interval dispensing by time with a pause - setting the number of dispensing cycles - pause time setting (from 0.1s up to 999hrs) - roller back-steps for drip-free dispensing - stand-by mode — prevents the tubing system from drying out - reversible rotation direction
Calibrating function	- for flow rate (ml/min) - for volume (ml)
Rotor speed	- 0.4 – 45.0 rpm (IPC) - 0.11 – 11.25 rpm (IPC-N)
Speed setting	- in %, resolution 0.1% (rpm) - in µl/min or ml/min (flow rate)
Speed control	closed loop control for load independent speed
RS232 interface	RS232 "in" - for operation controlling via PC RS232 "out" - for cascading up to 8 pumps
Digital inputs (TTL level)	Run/Stop, rotation direction, autostart
Analog input	Speed control (0–5 or 0–10V / 0–20 or 4–20mA)
Analog output	Speed monitoring (0–10VDC)
Differential pressure	1.0 bar (14.5 psi) possible (depending on tubing material); small tubing diameters and/or cassettes with pressure lever allow higher pressures
Motor type	DC motor
Power consumption	30 W
Power supply	115/230VAC; 50/60Hz
Protection rating	IP 30
Dimensions/Weight	see table above
Accessories	- cassettes - foot switch - Driver for "LabView" software (free download)