H-1250 / H-1240 / H-1200 針入度試驗器 H-1250 / 1240 / 1200
H-1250 / H-1240 / H-1200
針入度試驗器 H-1250 / 1240 / 1200
Penetrometers H-1250 / 1240 / 1200
廠牌：代理
供應商：大台北尖端儀器有限公司
聯絡電話：02-2531-0981
| 快速詢價 |
行動條碼QR Code
H-1200萬用針入度試驗儀
直讀式針入度儀可精確測定瀝青、水泥、凡士林和蠟等材料，以及食品、化妝品和藥品的濃稠度。本儀器採用精密加工的鋁製底座，工作檯面經研磨，精度達±0.005英吋（0.127mm），並配有垂直於底座的不鏽鋼支撐導桿，確保儀器穩固。內建水平儀配有兩個調平螺絲。鑄鋁水平儀頭部有微調裝置、柱塞機構和深度計。防塵的5吋（127mm）直徑指示盤刻度為400分，每分0.1mm，對應40mm的穿透深度，並具有歸零功能，可消除誤差。
H-1252 Portable Battery Paste Penetrometer
A light weight compact model (similar to H-1250) supplied with the same special plunger and cone-shaped penetrating needle and one 50gm weight. Shpg wt. 8 . (3.6kg). Cube cont. 2 cu. ft.
針入度試驗儀 Penetrometer
針入度(Penetration)又稱錐入度或硬度，其為測定潤滑脂或瀝青軟硬程度；其方式為硬度錐自由落體落入油脂平面5秒鐘所插入的深度，針入度愈大表示潤滑脂愈軟，即稠度愈小；反之則表示潤滑脂愈硬，即稠度愈大。瀝青的針入度測定，不用標準圓錐體而用載重共100g的標準尖針。測定的條件與潤滑脂相同。
針入度(Penetration)又稱錐入度或硬度，其為測定潤滑脂或瀝青軟硬程度；其方式為硬度錐自由落體落入油脂平面5秒鐘所插入的深度，針入度愈大表示潤滑脂愈軟，即稠度愈小；反之則表示潤滑脂愈硬，即稠度愈大。瀝青的針入度測定，不用標準圓錐體而用載重共100g的標準尖針。測定的條件與潤滑脂相同。
H-1200萬用針入度試驗儀
直讀式針入度儀可精確測定瀝青、水泥、凡士林和蠟等材料，以及食品、化妝品和藥品的濃稠度。本儀器採用精密加工的鋁製底座，工作檯面經研磨，精度達±0.005英吋（0.127mm），並配有垂直於底座的不鏽鋼支撐導桿，確保儀器穩固。內建水平儀配有兩個調平螺絲。鑄鋁水平儀頭部有微調裝置、柱塞機構和深度計。防塵的5吋（127mm）直徑指示盤刻度為400分，每分0.1mm，對應40mm的穿透深度，並具有歸零功能，可消除誤差。鎖緊環或柱塞重 47.5 g，配有 1/8 英吋（3 mm）直徑的孔，可與標準探針配合使用。兩個額外的配重塊（50 g和 100 g）不用時可安裝在底座上。隨附一根 H-1280 穿刺針（2.5 g）。整體尺寸：10-1/2 x 13 x 22 英吋。符合 ASTM D5、D217、D1168、D1191、D1321、D1403、D1831、D1855；AASHTO T49、T187 等標準。運輸重量：30 lbs（13.6 kg）。容積：4 cuft。
H-1202 針入度儀（電池糊製備及極板控制）
本儀器（與 H-1200 類似）可快速、直接、準確地測定電池漿的稠度。內含 50 g和 100 g砝碼、專用活塞和錐形穿刺針。運輸重量：30 lbs（13.6 kg）。體積：4 cuft。
H-1250 便攜式針入度試驗儀
與 H-1200 類似，但更輕巧，尺寸更小，適合野外作業。配備微調裝置，可進行精確設置，以及粗調裝置，可進行大致設定。
易於拆卸。此外，僅提供一個額外的 50 g配重。整體尺寸：7 英吋 x 7 英吋 x 16 英吋（178 mm x 178 mm x 406 mm）。符合與 H-1200 相同的規格。
包裝重量：8 lbs（3.6 kg）。容積：2 cuft。
H-1252 可攜式電池漿料針入度試驗儀
這是一款輕量精巧的型號（類似於 H-1250），配備相同的專用柱塞和錐形針入度探針，以及一個 50 g砝碼。運輸重量：8 lbs（3.6 kg）。體積：2 cuft。
H-1240 電子針入度試驗儀
用於針入度試驗的自動裝置，敘述如 H-1200 針入度儀。數位計時器附有釋放機構，可切換至秒、分鐘或小時。計時器可 0.1 秒至 9.9 秒、0.1 分鐘至 9.9 分鐘和 0.1 小時至 9.9 小時的設定範圍，以 1/10 秒為增量。按下按鈕即可釋放柱塞，並在達到預設時間後自動停止。
用於針入度試驗的自動裝置，敘述如 H-1200 針入度儀。數位計時器附有釋放機構，可切換至秒、分鐘或小時。計時器可 0.1 秒至 9.9 秒、0.1 分鐘至 9.9 分鐘和 0.1 小時至 9.9 小時的設定範圍，以 1/10 秒為增量。按下按鈕即可釋放柱塞，並在達到預設時間後自動停止。H-1240 電動針入度儀 110V/60Hz/1 ph. AC
H-1240.5F 220V/50/60Hz 電動針入度儀與 H-1240 相同，但包含電壓轉接器和內部調諧機構開關，可將頻率切換至 50Hz。
運輸重量：32 lbs（14.5 kg） 體積：4 cuft
H-2510 油脂瀝青針入度試驗儀
適用於硬潤滑油脂及軟性瀝青的針入度試驗。配備H-2520油脂針入度圓錐探針。
適用於硬潤滑油脂及軟性瀝青的針入度試驗。配備H-2520油脂針入度圓錐探針。用於測定硬質潤滑脂和軟凡士林的濃稠度。與改良型 H-1200 通用針入度儀相同，差異在於配備 H-2520 潤滑脂針入度圓錐探針。
符合 ASTM D217、D937 標準；防護等級 IP50：ASA 標準 A11.3。
運送重量：30 lbs（13.6 kg）；容積：4 cuft。
|
適用於 H-1200, H-1240, H-1250, 及其他型號的探針
|
 |
|
技術數據
|
|||
|
型號
|
應用
|
敘述
|
符合規範
|
|
H-1280
|
瀝青材料
|
硬化不鏽鋼針，黃銅套圈，直徑 3.2 mm，重量 2.5 g
|
ASTM D5: AASHTO T49, IP49; ASA Std.,
SS-R-406C Meth. 214.01 |
|
H-1300
|
與 H-1280 相同。經獨立實驗室認證，確保精確度。
|
||
|
H-1310
|
針入度250以上的蠟質
|
硬化不鏽鋼蠟穿刺針，針尖呈錐形，中空針桿，鈍頭截錐體。針套直徑約2.3mm。重量2.5 g。
|
ASTM D1321
|
|
H-1317
|
與 H-1310 相同，但經獨立實驗室認證。
|
||
|
H-1255
|
電池漿
|
硬化不鏽鋼尖端，附特殊柱塞。總重量 60 g ± 0.050 g。
|
無
|
|
H-2520
|
油脂測試針入度儀
|
空心90°黃銅錐形筒，高拋光不鏽鋼筒尖。可拆卸螺帽和筒桿。重量102.5 g。
|
ASTM D217, D937; ASA Std. Z11.3
|
|
H-2522
|
與 H-2520 相同，差別在於材質為不鏽鋼。重量：102.5 g
|
||
|
H-2525
|
H-2520 錐形探針的替換頭、螺帽和閥桿
|
不鏽鋼材質。總重量符合ASTM標準。
|
|
|
H-2524
|
油脂測試針入度儀
|
鎂錐和柱塞，尺寸與 H-2520 相同。錐和柱塞總重量 30.0 g。
|
ASTM D2884
|
|
H-2529
|
食物及塗料
|
鋁製，尺寸與 H-2520 相同。總重量 35 g。
|
美國農業部
|
|
H-1270
|
測量固體和塑化脂肪（起酥油、人造奶油、奶油等）的硬度。
|
10°鋁製錐形探針，1/8英吋（3.2mm）套圈，1/32英吋（0.8mm）不鏽鋼鈍頭，總長度4-3/16英吋（106mm），重量45g
|
AOCS cc-16-60
|
|
H-2519
|
可獲得的少量樣本（例如，回收廢潤滑脂）
|
1/4比例。 （不能取代ASTM D217標準中規定的全尺寸錐體。）重量：9.38g
|
ASTM D1403
|
Available Items
|
Item Number
|
Item
|
|
PE-H-1200
|
Universal Penetrometer, with H-1280 needle
|
|
PE-H-1202
|
Penetrometer, with H-1255 cone shaped needle
|
|
PE-H-1240
|
Electric Penetrometer, 110V/60Hz/1pH, with H-1280 needle
|
|
PE-H-1240.5F
|
Electric Penetrometer, 220V/50Hz/1pH
|
|
PE-H-1250
|
Portable Penetrometer with H-1280 needle
|
|
PE-H-1252
|
Portable Battery Paste Penetrometer
|
|
PE-H-2510
|
Grease Penetrometer, with H-2520 brass cone
|
|
PE-H-1280
|
Penetrometer Needle, ASTM D5
|
|
PE-H-1300
|
Penetrometer Needle, ASTM D5, with certification
|
|
PE-H-1310
|
Wax Penetrometer needle, blunted cone tip
|
|
PE-H-1317
|
Wax Penetrometer needle, blunted cone,w/certification
|
|
PE-H-1270
|
20" Aluminum cone, s/s blunt tip
|
|
PE-H-2519
|
1/4 scale cone, ASTM D1403
|
|
PE-H-2520
|
Hollow 90 brass cone, ASTM D217
|
|
PE-H-2522
|
Grease cone, hollow s/s, ASTM D217
|
|
PE-H-2524
|
Grease cone, hollow, Magnesium, ASTM D 2884
|
|
PE-H-2525
|
Tip, Nut & Stem only for H2520
|
|
PE-H-2529
|
Aluminum cone, Food & Paste
|
|
PE-H-2600.17F
|
Thermometer 66-80F (ASTM 17F)
|
|
PE-H-2600.63F
|
Thermometer 18-89F (ASTM 63F)
|
|
PE-H-2600.64F
|
Thermometer 77-131F (ASTM 64F)
|
|
PE-H-2610.17C
|
Thermometer 19-27C (ASTM 17C)
|
|
PE-H-2610.63C
|
Thermometer -8 to 32C (ASTM 63C)
|
|
PE-H-2610.64C
|
Thermometer 25-55C (ASTM 64C)
|
H-1200 Universal Penetrometer
Direct reading unit accurately determines consistency of bituminous materials, cement, petrolatum and waxes, as well as food, cosmetic, and pharmaceutical products. Unit has accurately machined aluminum base with grooved table surface ground to ±.005" (0.127mm) and stainless steel support guide rods perpendicular to the base for rigidity. Built in spirit level has two adjusting leveling screws. Cast aluminum head features fine adjustment, plunger mechanism and depth gage. Dust-proof 5" (127mm) dia. indicator dial is graduated into 400 divisions of 0.1mm, corresponding to 40mm penetration, and has zero reset to eliminate errors.
Locking collar or plunger weighs 47.5g and is supplied with 1/8" (3mm) dia hole for use with standard needles. Two additional loading weights (50g and 100g) mount on base when not in use. One H-1280 penetration needle (2.5g) is furnished. Overall dimensions: 10-1/2x13x22". Meets ASTM D5, D217, D1168, D1191, D1321, D1403, D1831, D1855: AASHTO T49, T187: others Shpg wt. 30 . (13.6kg). Cube. cont. 4 cu ft. NOTE: Special cones and needles available on request.
H-1250 Portable Penetrometer
Similar to H-1200 but lighter and smaller size for field work. Micrometer adjustment for accurate settings as well as coarse adjustment for approximate settings.
Easy to disassemble. Also, only one additional 50gm. loading weight is furnished. Over-all dimensions, 7" x 7" x 16"H (178mm x 178mm x 406mm) Meets same specifications as H-1200
Shpg wt 8 . (3.6kg). Cube cont. 2 cu. ft.
Shpg wt 8 . (3.6kg). Cube cont. 2 cu. ft.
H-1202 Penetrometer (Battery Paste Preparation & Plate Control)
This instrument (similar to H-1200) offers a rapid, direct, and accurate determination of battery paste consistency. Included is a 50 and 100 gram weight, a special plunger and cone-shaped penetrating needle. Shpg. wt. 30 . (13.6kg.) Cube. cont. 4 cu. ft.
This instrument (similar to H-1200) offers a rapid, direct, and accurate determination of battery paste consistency. Included is a 50 and 100 gram weight, a special plunger and cone-shaped penetrating needle. Shpg. wt. 30 . (13.6kg.) Cube. cont. 4 cu. ft.
H-1240 Electric Penetrometer
An automated device for penetration testing, described as the H-1200 needle penetration tester. A digital timer with a release mechanism is available, switchable to seconds, minutes, or hours. The timer can be set in increments of 0.1 seconds to 9.9 seconds, 0.1 minutes to 9.9 minutes, and 0.1 hours to 9.9 hours, in 1/10th-second increments. Pressing a button releases the plunger, and the device automatically stops after the preset time. 110V/60Hz/1 ph. AC
H-1240.5F 220V/50/60Hz Electric Needle Penetration Tester is identical to the H-1240, but includes a voltage adapter and an internal tuning mechanism switch to switch the frequency to 50Hz.
Shipping weight: 32 lbs (14.5 kg) Volume: 4 cuft
H-1252 Portable Battery Paste Penetrometer
A light weight compact model (similar to H-1250) supplied with the same special plunger and cone-shaped penetrating needle and one 50gm weight. Shpg wt. 8 . (3.6kg). Cube cont. 2 cu. ft.
H-2510 Grease Penetrometer
Determines the consistency of hard lubricating grease and soft petrolatum. Same as improved Humboldt H-1200 Universal Penetrometer, except furnished with an H-2520 Grease Penetration Cone.
Meets ASTM D217, D937; IP50: ASA Std. A11.3.
Shpg. wt. 30 . (13.6kg.) Cube cont. 4 cu. ft.
Shpg. wt. 30 . (13.6kg.) Cube cont. 4 cu. ft.
|
For use with Models H-1200, H-1240, H-1250, and other Penetrometers
|
|
|
|
Technical Data
|
|||
|
Model
|
Applications
|
Description
|
Meet Specs.
|
|
H-1280
|
BITUMINOUS Materials
|
Hardened stainless steel needle, brass ferrule, 3.2mm dia. Wt. 2.5gm
|
ASTM D5: AASHTO T49, IP49; ASA Std.,
SS-R-406C Meth. 214.01 |
|
H-1300
|
Same as H-1280. Certified for accuracy by independent laboratory
|
||
|
H-1310
|
WAXES with 250 or more penetration
|
Hardened stainless steel wax penetration needles with tapered point, hollow shaft, blunt tip of truncated cone. Ferrule is approx. 2.3mm dia. Wt. 2.5g
|
ASTM D1321
|
|
H-1317
|
Same as H-1310, but with certification by independent laboratory.
|
||
|
H-1255
|
BATTERY Paste
|
Hardened stainless steel tip with special plunger. Total wt. 60 gm ±.050g.
|
N/A
|
|
H-2520
|
GREASE-testing penetrometers
|
Hollow 90° brass cone, highly polished stainless steel tip. Removable nut and stem. Wt. 102.5g.
|
ASTM D217, D937; ASA Std. Z11.3
|
|
H-2522
|
Same as H-2520, except stainless steel. Wt. 102.5g
|
||
|
H-2525
|
REPLACEMENT tip, nut & stem for H-2520 cone
|
Stainless Steel. Total weight meets prescribed ASTM requirements.
|
|
|
H-2524
|
GREASE-testing penetrometers
|
Magnesium cone and plunger, same dim. as H-2520. Total wt. cone and plunger 30.0g.
|
ASTM D2884
|
|
H-2529
|
FOOD products & paste paints
|
Aluminum.Same dimension as H-2520. Total wt. 35g.
|
U.S. Dept. of Agriculture
|
|
H-1270
|
Measuring firmness of solid and plasticized FATS (shortenings, margarine, butter, etc).
|
10° aluminum cone 1/8" (3.2mm) ferrule, 1/32" (0.8mm) stainless steel blunt tip Overall length 4-3/16" (106mm) Wt. 45gm
|
AOCS cc-16-60
|
|
H-2519
|
SMALL obtainable samples (i.e. recovery of used grease)
|
1/4 scale. (not considered a substitute for full-size cone specified in ASTM D217.) Wt. 9.38g
|
ASTM D1403
|
Available Items
|
Item Number
|
Item
|
|
PE-H-1200
|
Universal Penetrometer, with H-1280 needle
|
|
PE-H-1202
|
Penetrometer, with H-1255 cone shaped needle
|
|
PE-H-1240
|
Electric Penetrometer, 110V/60Hz/1pH, with H-1280 needle
|
|
PE-H-1240.5F
|
Electric Penetrometer, 220V/50Hz/1pH
|
|
PE-H-1250
|
Portable Penetrometer with H-1280 needle
|
|
PE-H-1252
|
Portable Battery Paste Penetrometer
|
|
PE-H-2510
|
Grease Penetrometer, with H-2520 brass cone
|
|
PE-H-1280
|
Penetrometer Needle, ASTM D5
|
|
PE-H-1300
|
Penetrometer Needle, ASTM D5, with certification
|
|
PE-H-1310
|
Wax Penetrometer needle, blunted cone tip
|
|
PE-H-1317
|
Wax Penetrometer needle, blunted cone,w/certification
|
|
PE-H-1270
|
20" Aluminum cone, s/s blunt tip
|
|
PE-H-2519
|
1/4 scale cone, ASTM D1403
|
|
PE-H-2520
|
Hollow 90 brass cone, ASTM D217
|
|
PE-H-2522
|
Grease cone, hollow s/s, ASTM D217
|
|
PE-H-2524
|
Grease cone, hollow, Magnesium, ASTM D 2884
|
|
PE-H-2525
|
Tip, Nut & Stem only for H2520
|
|
PE-H-2529
|
Aluminum cone, Food & Paste
|
|
PE-H-2600.17F
|
Thermometer 66-80F (ASTM 17F)
|
|
PE-H-2600.63F
|
Thermometer 18-89F (ASTM 63F)
|
|
PE-H-2600.64F
|
Thermometer 77-131F (ASTM 64F)
|
|
PE-H-2610.17C
|
Thermometer 19-27C (ASTM 17C)
|
|
PE-H-2610.63C
|
Thermometer -8 to 32C (ASTM 63C)
|
|
PE-H-2610.64C
|
Thermometer 25-55C (ASTM 64C)
|
