MEK MEK 耐磨試驗機
行動條碼QR Code
符合ASTM D7835，EN 13523-11，參考：ASTM D 4752，ASTM D 2486，ASTM D 5402; ISO 50230
MEK摩擦試驗機是一款用來測試彩色鋼板耐丁酮（MEK）溶劑摩擦腐蝕性能的儀器。它的工作原理就是帶有丁酮溶劑的摩擦塊在彩鋼板表面按照預先設置的時間、頻率來回摩擦，摩擦規定的週期之後，通過被摩擦表面的磨損情況來評定彩板耐丁酮腐蝕性。
主要特點：
MEK摩擦實驗機是自動化摩擦測試儀，操作安全，完全氣動無需接電，操作員與 MEK試劑接觸機率最低，氣壓穩定。
自動選擇摩擦週期（ 1～9999），操作簡單， 因為浪費和被揮發的試劑少，所以所需的 MEK試劑少。
規格:
機器重量：62.5磅。 （28.3公斤）
MEK儲液槽容量：425 cc
摩擦塊重量：6.8磅。 （3公斤）ASTM / 2.20磅（1公斤）歐盟標準
衝程長度：203毫米（8英寸）
每分鐘衝程數（來回摩擦）：70
最大氣源壓力：965 KPa（140 psi）
操作壓力下的空氣消耗量：550 KPa（80 psi）時為2.35 SCFM
最小柔性氣源供應尺寸：¼ I.D.
過濾器的進氣口連接：¼ NPT
棉墊尺寸 1½x1¾, 2層
在控制工作區域，沒有溶劑飛濺傷害
溶劑消耗：25毫升溶劑容量，可支持到600次摩擦
壓力：重量限定模塊，保持壓力一致
鉸鏈摩擦模塊，不影響調換摩擦襯墊或者調換測試樣品
計數器最小/最大行程數：1-9999
氣源：550 kpa（80 psi）清潔乾燥（非冷凝）
測試面板尺寸：5 x 12英寸（127 x 305mm）
電氣要求：無（所有氣動系統）
面板厚度最大：** 1/8英寸（3.2毫米）**更厚的面板可以通過調整來運行
前面板安裝空氣壓力和流量控制器
有過濾器和自動下水功能安置過濾裝置
尺寸（WxDxH）：18 x 19 x 19英寸（457 x 483 x 483mm）
MEK儲液槽容量：425 cc
摩擦塊重量：6.8磅。 （3公斤）ASTM / 2.20磅（1公斤）歐盟標準
衝程長度：203毫米（8英寸）
每分鐘衝程數（來回摩擦）：70
最大氣源壓力：965 KPa（140 psi）
操作壓力下的空氣消耗量：550 KPa（80 psi）時為2.35 SCFM
最小柔性氣源供應尺寸：¼ I.D.
過濾器的進氣口連接：¼ NPT
棉墊尺寸 1½x1¾, 2層
在控制工作區域，沒有溶劑飛濺傷害
溶劑消耗：25毫升溶劑容量，可支持到600次摩擦
壓力：重量限定模塊，保持壓力一致
鉸鏈摩擦模塊，不影響調換摩擦襯墊或者調換測試樣品
計數器最小/最大行程數：1-9999
氣源：550 kpa（80 psi）清潔乾燥（非冷凝）
測試面板尺寸：5 x 12英寸（127 x 305mm）
電氣要求：無（所有氣動系統）
面板厚度最大：** 1/8英寸（3.2毫米）**更厚的面板可以通過調整來運行
前面板安裝空氣壓力和流量控制器
有過濾器和自動下水功能安置過濾裝置
尺寸（WxDxH）：18 x 19 x 19英寸（457 x 483 x 483mm）
安裝要求:
需要一牢靠堅固且面積足夠大(各一平方米左右)的試驗台和相應的電源插座.MEK摩擦試驗機完全氣動,無需電源,但是需要一壓縮空氣源,使用壓力550Kpa,最大不超過690Kpa.
MEK Rub Test Machine
Meets or exceeds: ASTM D 4752, ASTM D 2486; ASTM D 5402; ISO 50230
The MEK Rub Test machine has been developed to combat the problem of inconsistent test results. This semi automated machine gives the line operator and quality control personnel the ability to duplicate results from the laboratory to the production line.
The MEK Rub Test machine has been developed to combat the problem of inconsistent test results. This semi automated machine gives the line operator and quality control personnel the ability to duplicate results from the laboratory to the production line.
-
Hands off testing, Repeatable test results
-
Intrinsically safe - no electric involved
-
Constant pressure, Dead Weight Rubbing Block
-
Simple operation
-
Metered orifice with auto shutoff to provide consistent flow of MEK
-
Can be easily used for test to failure
-
Hand contact with MEK minimized, solvent added by means of squeeze bottle
-
Controlled Stroke count. Can be set 1 - 9999 strokes
-
Flow Controlled 425cc MEK reservoir capacity
Specifications
|
Weight of machine
|
28.3 kg (62.5 lbs)
|
||
|
MEK reservoir capacity
|
425 cc.
|
||
|
Mass of Rubbing Block
|
3kg (6.8 lbs)
|
||
|
Stroke Length
|
203mm (8”)
|
||
|
Number of strokes/min
|
(Double Rub) 70
|
||
|
Operational air pressure
|
550 KPa (80 psi)
|
||
|
Max air supply pressure
|
965 KPa (140 psi)
|
||
|
Air consumption @ operational pressure
|
2.35 SCFM @ 550 KPa (80 psi)
|
||
|
Minimum Flexible air line supply size
|
¼” I.D.
|
||
|
Air inlet connection at filter
|
¼ NPT
|
||
|
Cotton Pad size
|
1½ x 1¾, 2 ply
|
||
|
Counter min/max number of strokes
|
1-9999
|
||
|
Air supply
|
550 kpa (80 psi)Clean and dry (non condensing)
|
||
|
Dimensions (Width Depth Height)
|
457x483x483mm (18”x19”x19”)
|
||
|
Test panel size
|
127mm x 305mm (5” x 12”)
|
||
|
Electrical Requirements
|
None (all pneumatic system)
|
||
|
Panel thickness max**
|
3.2 mm (1/8”) **thicker panels can be run with a simple adjustment.
|
Available Items
|
Item Number
|
Item
|
|
|
AB-410103
|
MEK Rub Test Machine
|
|
|
AB-410131
|
Variable Stroke Kit - The variable stroke kit allows the user to run non-standard size panels so that a customer can test panels that are shorter in length than what is called for in the standards testing methods. When ordered with the machine as an option will be pre-installed at the factory. The kit can be added to the machine at anytime and only requires a basic amount of tools to retrofit to the machine.
|
|
|
AB-410191
|
MEK-Genie Data Collection Kit - The data collection kit is a add on interface that connects to the machine to allow the operators to collect data pertaining to the tests performed by the machine. This kit can be added to the system at any time and requires no tools to install. The machines are all equipped from the factory with a plug in port that only requires the addition of the software and connector kit. For customers that are already using the DJH Designs Film Build Software System the data collection kit plugs directly into the DJH PCI interface that is included with the DJH View Software. For new customers or customers requiring this to be connected to a different PC they will need to order the PC interface to connect the data kit to the PC.
|
|
|
AB-410197
|
PC interface, USB device
|
|
