過程指示器830 S1

採用面板式安装外殼的環路供電數字指示器

環路供電830系列數字指示器可通用於電流測量電路；通過端子輕鬆進行切換（0 … 20 mA或4 … 20 mA）。 可顯示最低0.3 mA電流的測量值。 其壓降低至0.5 V，因此也可用在低負載電壓的電流環路中。

事實

• 無需電源或電源線纜的數字指示器
• 不存在來自電源耦合的信號干擾
• 指示器不受電網中斷影響
• 無寄生電壓
• 通用量程調整
• 可選單位符號
• 可自由配置，浮動最小值/最大值開關输出可選
• 電位隔離Ex/Ex
• IP 65
• 23-mm大數字顯示
• 4位顯示屏： 測量範圍高達10 000，顯示範圍– 9999 ... 9999
• 通過附加的集成條形圖提供範圍概覽
• 壓降0.5 V

• 無需外部參考電流即可配置

• 参数也可在工作過程中修改
• 設置受密碼保護
• 已獲准用於HART電路
• 3年保固

Digital loop-powered 830 series indicators are universally usable in current measurement circuits; switching (either 0 … 20 mA or 4 … 20 mA) is simply performed via the terminals. The measured value is displayed for a current as low as 0.3 mA. Thanks to the low voltage drop of just 0.5 V, the use in current loops with a low load voltage is also possible.

Facts

• Digital indicator without power supply or power cables
• No signal interference from power supply coupling
• Indicator not affected by grid outage
• No parasitic voltages
• Universal range adjustment
• Selectable unit symbols
• Freely configurable, floating min/max switched outputs, optional
• Potential isolation Ex/Ex
• IP 65
• Large 23-mm digital numbers
• 4-digit display: measuring range up to 10 000, display range –9999 ... 9999
• Range overview through additional integrated bargraph
• Voltage drop 0.5 V
• Configurable without external reference current
• Parameters can also be modified during operation
• Settings protected by a passcode
• Approved for use in HART circuits
• 3-year warranty