廠牌:日東精工分析科技
供應商:翔貿儀器有限公司 中央製作所 台灣總代理
聯絡電話:04-22922214
快速詢價 |
商品規格 | |
商品名稱:
|
總氮分析儀 TN-100型 |
測定原理:
|
高溫氧化裂解化學發光法 |
測定範圍:
|
極微量~5000ppm |
樣品取量:
|
200μl或以內,採注射針方式 |
觸煤:
|
白金氧化觸媒 |
測定時間:
|
10分以內 |
操作控制:
|
PC配合軟體程式Data Base |
所需氣體:
|
Ar 99.8%以上, O2 99.7%以上 |
適用對象:
|
蒸餾水、河水、海水、工業廢水 |
選購品 | |
|
|
ASC-150L (Liquid Auto sampler) 適用於液體樣本 |
|
|
|
ASI-100 (Automatic Sample Injector) | |
|
|
CRI-100V (Constant Rate Injector)
|
|
|
|
GI-100 氣體注射器 適用於氣體樣本 |
|
|
TN-100 | |
Measurement of total trace nitrogen levels in petroleum refining, petrochemical and other petroleum products is considered to be important in consideration of quality, air pollution and other factors. The use of the newest database software not only facilitates easy storage, analysis and database management of data, but is also useful in deploying effective quality control. (complies with ASTM D4629, D5178, D6069) |
|
Features
The TN-100 is provided with all the accessories required for measurement of non-aqueous and aqueous samples. System Configuration for Measurement of Non-Aqueous Samples |
TN-100 Specifications | |
|
|
Applicable Samples: | Aqueous, non-aqueous and gaseous samples* |
|
|
Analysis method: | Oxidative pyrolysis, chemiluminescence method (reduced pressure) |
|
|
Catalyst: | Platinum oxidation catalyst |
|
|
Furnace temperature: |
Max 999oC |
|
|
Measurement range: | 0.1-5,000 ppm (non-aqueous samples) 0.01-5,000 ppm (aqueous samples) |
|
|
Sample size: | 200μl or less (Non-aqueous samples), Max. 50μl (aqueous samples) |
|
|
Measurement time: | Within 10 min./measurement |
|
|
Gas requirements: | Argon (purity:99.98% or more, 290-490 kPa) Oxygen(purity:99.97% or more, 290-490 kPa) |
|
|
Dimensions, weight: | approx. 560(W)×400(D)×520(H)mm, 53kg |
|
|
* :An optional constant rate injector (CRI-100V) is required for measurement of non-aqueous samples. The optional gas injector (GI-100) is required when measuring gaseous samples.
|
|
Options |
|
Liquid Auto Sampler model ASC-150L Up to 50 samples can be sampled automatically. This sampler can accommodate various types of samples and has numerous control parameters.
Sample: Aqueous and/or Non-aqueous Samples* *: Aqueous sample contain suspended matters may have a problem by ASC-150L. |
|
Automatic Sample Injector
model ASI-100 Aqueous samples are measured and injected automatically. The sample aspiration rate can also be controlled. Applicable samples: Aqueous samples having low viscosity and low suspended solid levels Aspiration pump: 1 each for samples and rinsing (metalor pump) Injection volume: 25μl Dimensions & weight: approx. 265(W)×240(D)×210(H)mm, 5kg |
|
Constant Rate Injector
model CRI-100V Non-aqueous samples are injected at a constant rate using a gas-tight micro syringe. Syringe: 50μl, 100μl, 250μl (gas-tight micro syringes) Injection rate: 0.2-1.3μl/sec., variable (Normally used at 1μl/sec.) Dimensions & weight: approx. 250(W)×150(D)×286(H)mm, 7kg |
|
Gas Injector
model GI-100 This system is used during measurement of total nitrogen levels in gaseous samples. Applicable samples: Gaseous samples Standard sample size: Max. 20μl (Gastight Micro syringe) Gas sample size: Max. 10μl (Gastight Micro syringe) Gas requirements: Argon (purity:99.98% or more, 200-390kPa) Dimensions & weight: approx. 120(W)×250(D)×235(H)mm, 4kg |
|