JH-B1 泡殼成形自動包裝機
行動條碼QR Code
JH-B1 泡殼成形自動包裝機
| JH-B1 泡殼成形自動包裝機應用了最新科技設計，使得此機價格低廉，耗材低廉，運轉成本低廉，但是成本效率卻是最高的。精準的碇劑 / 膠囊自下料系統及自動檢測系統使得本機全天候運轉祇需一人即可。 JH-B1 可適用於碇劑、糖衣 / 膜衣碇、硬膠囊、軟膠囊的 PTP包裝。 |
|
| 特性如下 | |
| 1. | 此機採連續式的旋轉運動非間斷式的往復運動，故無衝擊及噪音，運轉流暢。 |
| 2. | 碇劑包裝可打橫貫的切線。 |
| 3. | 採鐵弗龍蒸鍍的加熱板，接觸加熱 P.V.C 膜，使得加熱溫度較低，加熱材料均勻性較佳，運轉速度較穩定。 |
| 4. | 全機採 SUS 304 不鏽鋼外殼被覆，保證符合 G.M.P 要求標準。 |
| 5. | 邊對邊的切斷方式，中間沒有材料浪費，至少省 6% 以上的包材成本。 |
| 6. | 狀況監視器可顯示停機原因，如 P.V.C 鋁箔不足、加熱器故障等。 |
| 7. | 換模調整準備時間不超過 1 小時，其中包含機換模、清潔、調整。 |
| 產品規格 | |
| 週 期 時 間 | 最大運轉速度每分鐘 40 週期。 |
| P.V.C 容 量 | 最大可到 130mm 寬 * 350micron 厚。 |
| 每片成形面積 | 最大可到 115 * 65mm。 |
| 抽 拉 深 度 | 孔深標準為 12mm。 |
| 尺寸 | |
| 長 | 2150mm |
| 寬 | 1150mm |
| 高 | 1800mm |
| 重 | 950kg |
| 電力 | 220 / 240 3相 50 / 60Hz |
| 能源消耗 | 4.2kw 空氣 200L / min at 5kg / cm |
| 主機主要元件如下： | BLISTER PACKING MACHINE |
| 機架：機械驅動機構與氣壓驅動結構。 |
|
| 包材進料系統與拉料輪 | |
| 手工下料軌道板 | |
| 鋁箔進料系統 | |
| 切線站 | |
| 振動下料系統 / 膠囊自動選料下料系統 | |
| 控制面板與監視系統 | |
| P.V.C 預熱板 | |
| 熱成形系統 ( 高壓空氣成形 ) | |
| 熱封系統 打字 / 批號 機構 | |
| 成品計數器 切斷模 P.I.D 溫度控制器 |
JH-B1 Blister forming and automated packing machine
|
The JH-B1 blister forming and automatic packing machine adopts the latest high-tech design that allows the cost of the servo to be affordable, with inexpensive supplies, low operating cost, yet with a maximum cost-return ratio. The automated precision tablet/capsule download system and automated screening system allow the servo to operate round-the-clock, while manned by only one operator. The JH-B1 servo is compatible for PTP packing of tablets, sugar-coated/membrane-coated tablets, hard capsules, and soft capsules. |
|
| Its feature is as follows | |
| 1. | The servo operates on a continuous rotation motion of a non-interrupted repetitive motion to be free of impact, noise, and runs smoothly. |
| 2. | Option to incorporate row-wide perforation in tablet packing. |
| 3. | Comes with Teflon plated heating board and contact heated PVC membrane to allow a lower heating temperature, optimal even heating, and stable rotation speed. |
| 4. | The servo housing is built of SUS 304 stainless steel and is guaranteed to meet G.M.P. demand criteria. |
| 5. | A diagonal trim-off method that does not create intermittent material waste to help conserve at least 6% in packaging cost. |
| 6. | The status monitor prompts causes leading to servo pauses, i.e. low PVC foil, heater malfunction, etc. |
| 7. | Mold adjustment and prepping guaranteed to be less than one hour, including servo mold change, cleaning and adjustment. |
| Product specification | |
| Cycle timing | maximum rotation speed at 40 cycles per minute. |
| PVC capacity | maximum up to130mm in width and 350 micron in thickness |
| Area of each blister formed | Maximum up to 115*65mm. |
| Depth of draw | Standard hole depth at 12mm. |
| Dimensions | |
| Dimensions | 2150mm in length, 1800mm in height, 1150 in width |
| Weight | 950kg |
| Power rating | 220/240V, 3§, 50/60 Hz |
| Power consumption | 4.2kw Air: 200L/min at 5 kg/cm |
| The servo’s main components comprised of | BLISTER PACKING MACHINE |
| Equipment mount: for the mechanical transmission mechanism and pneumatic pressure transmission mechanism |
|
| Packing material feeding system and material dispensing wheel | |
| Manual material unloading panel | |
| Aluminum foil feeding system | |
| Line cutting station | |
| Vibrating material unloading system/automated capsule sorting and unlading system | |
| Control panel and monitoring system | |
| PVC preheating panel | |
| Heat forming system (pressurized air forming) | |
| Heat sealing system, typeset/lot number imprint mechanism | |
| Complete product counter, trim-off mold, PID temperature controller |
產品關鍵字：
