廠牌:代理
供應商:大台北尖端儀器有限公司
聯絡電話:02-2531-0981
快速詢價 |
本裝置為冷溫感的評估目的所開發之THERMO LABE II型測試機。可針對熱傳導與保溫性進行精密的計算測試,進行改良、設計作業。從衣服的舒適性評估等一直以來的纖維狀材料業界到食品業界、醫療業界、化粧品的產品開發等等,依目的的不同可進行多樣化的測試。
基礎溫度可控制一定之溫度小型化之冷卻基板。使用白金材質溫度感應器,可正確且迅速的控制溫度。基板表面的溫度以數位顯示器表現,可於熱傳導試驗之類場合中,正確的管理基板之溫度。另外,利用電流產生一定溫度方式,減少溫度的變異,良好的熱物性測定數據再現性。
q max之測定(冷溫感測定)
TBOX重量:90g 熱面積:9cm2
KES(Kawabata Evaluation)測試標準
為以京都大學川端雄教授及奈良女子大學丹羽雅子教授為中心,由日本纖維機械學會內所設立之「風合い計量と規格化研究委員会」委員會所確立之,衣服用布料的觸感客觀評價方法。
本装置は、冷温感の評価のために開発されたサーモラボ II 型を、さらに熱伝導と保温性も精密かつ迅速に計測できるように改良し開発した測定装置です。衣服の快適性評価など従来の繊維状材料業界から食品業界や医療業界、化粧品の製品開発など、目的に応じてさまざまな測定が行うことができます。
ベース温度を一定にコントロールできるコンパクトな冷却ベースです。白金温度センサーにより温度を検出しますので、正確かつ迅速に温度コントロールが可能。ベース面の温度をデジタルパネルメータに表示しますので熱伝導試験などに使用する場合、正確にベース温度の管理を行うことができます。また、電気的に一定温度にするため、温度のバラつきがなく、良好な熱物性測定データを再現します。Water Boxの替わりとして対応しています。
q maxの測定(冷温感測定)
1.q max値は、面積9cm2、質量9.79g純銅板(熱容量0.41855J/℃)に熱を蓄え、これが試料表面に接触した直後、蓄えられた熱量が低温側の試料物体に移動する熱流のピーク値(フィルターにより、接触後約0.2secでピークに達する)を測定した値です。すなわち、信号は時定数0.2secの1次比例要素を通過させています。
このフィルターが、人体の皮膚が物体に接触する時に感じる冷温感に関係していると考えられるところの熱移動をシミュレートしています。
2.q maxが大きいほど冷、小さいほど温に対応します。q maxは、銅板初期温度Toと試料温度Tsとの差△Tに比例し、また、接触圧にも関係し、標準測定は10g/cm2です。
TBox重量:90g 熱板面積:9cm2。
京都大学川端季雄教授および奈良女子大学丹羽雅子教授を中心に、日本繊維機械学会内に設けられた「風合い計量と規格化研究委員会」によって、衣服用布地の風合いの客観評価法が確立されました。
寸法/重量 |
|
---|---|
電源 | 100V 単相60Hz(50Hz用もあり) |
その他 | 風洞(保温性測定用) |
寸法/重量 |
|
---|---|
電源 | AC100V、60Hz/50Hz、最大消費電力80W |
オプション仕様 |
|
This instrument is an improved type of Thermo Labo, which evaluates warm/cool feeling by measuring thermal conductivity and heat retention property precisely and promptly. Accordingly, Thermo Labo can evaluate the following 3 points basically.
This is a compact cooling base which can control and stabilize the base temperature.
The platinum temperature sensor detects the temperature, which enables accurate and speedy temperature control. The base temperature is displayed on the digital panel meter, so base temperature can be managed accurately when using it for heat conductivity tests, etc.
As the temperature is electrically stabilized, there are no temperature variations, resulting in superior reproduction of thermal property data.
I Measurement of q max (warm/cool feeling measurement)
1) q max is the value measured by the following system.
Build up the heat in solid copper plate (0.41855 J/ ºC) with 9cm2 of area and 9.79 g of mass, on touching the upper surface of sample , stored calories will pass to the sample’s lower temperature side. The peak value (will reach to the peak in 0.2 second after contact by the filter) of the moved heat current is what we call q max. Namely the signal passes the initial proportional factor of a time constant of 0.2sec. This filter simulates the heat conduction that is considered to relate to the warm/cool feeling felt when the skin layer touches objects.
2) The bigger q max value, the cooler; the higher the q max value, the warmer. q max is in proportion to –T, which is the difference between initial copper plate temperature To and the sample temperature Ts. It also relates to the contact pressure. 10gf/cm2 is used as the standard test (the weight of TBOX is 90g, the area of TBOX heat plate is 9 cm2).
Dimensions/Weight | Measuring Unit: 230 (W) x 360 (D) x 110 (H)mm/4.5kg Electronic Unit: 490 (W) x 300 (D) x 250 (H)mm/17.kg |
---|---|
Power source | Voltage: Adjustable by transformer; Frequency: 60Hz/50Hz |
Options | Wind tunnel |
Dimensions/Weight | Cooling base: 120 (W) x 120 (D) x 105(H) mm/2.5kg Electronic unit: 160 (W) x 190 (D) x 260 (H) mm/5.5kg |
---|---|
Power source | AC100V, 60Hz/50Hz, 80W (maximum) |
Performance | Max. cooling capacity: 50W Max. cooling temperature difference: -20 ºC relative to surrounding temperature (minimum temperature setting: 0 ºC) Temperature display: ±0.x ºC Precision of temperature settings: ±0.1 ºC |