TEN 3K -- 170K 表針式張力測定器(張力計) TEN 3K -- 170K
TEN 3K -- 170K
表針式張力測定器(張力計) TEN 3K -- 170K
Hand Tensionmeter ZIVY
廠牌：代理
供應商：大台北尖端儀器有限公司
聯絡電話：02-2531-0981
| 快速詢價 |
行動條碼QR Code
在加工過程中，無論紗線和線受到什麼負載，均應使用紗線張力計進行檢查。 Zivy手持式張力計可精確測量紗線和纖維的運行線張力。 ZIVY TEN型張力計是袖珍型，是機械和機械操作員的最愛。
它們具有兩個精密的滾珠軸承安裝的V槽滾輪，能夠測量高線速度。 提供了12種型號，從0.5-3 cN到50-170 cN。 所有型號均配備泡棉塑膠手提箱。
它們具有兩個精密的滾珠軸承安裝的V槽滾輪，能夠測量高線速度。 提供了12種型號，從0.5-3 cN到50-170 cN。 所有型號均配備泡棉塑膠手提箱。
操作方式
ZIVY紗線張力儀專為單手使用而設計。
紗線在兩個滾輪上運行，為了減小摩擦，滾輪安裝在微型滾珠軸承上。 如圖所示，用右手握住儀器，使內滾輪與要測量的紗線接觸，使紗線與儀器頂部的槓桿平行。 然後透過壓下槓桿將外滾輪樞轉到其止擋。 然後，內滾輪將處於一個位置，該位置代表紗線張力與儀表中的主校正彈簧之間的平衡。 該位置透過精密齒輪傳遞到指示器指針，該指針在儀器的刻度盤上顯示紗線張力。 讀數以cN為單位。 應當讀取最大和最小張力，指示器指針跟隨張力的周期性變化。
ZIVY紗線張力儀專為單手使用而設計。
紗線在兩個滾輪上運行，為了減小摩擦，滾輪安裝在微型滾珠軸承上。 如圖所示，用右手握住儀器，使內滾輪與要測量的紗線接觸，使紗線與儀器頂部的槓桿平行。 然後透過壓下槓桿將外滾輪樞轉到其止擋。 然後，內滾輪將處於一個位置，該位置代表紗線張力與儀表中的主校正彈簧之間的平衡。 該位置透過精密齒輪傳遞到指示器指針，該指針在儀器的刻度盤上顯示紗線張力。 讀數以cN為單位。 應當讀取最大和最小張力，指示器指針跟隨張力的周期性變化。
型號
|
Model
|
Measuring Range
|
|
TEN-3K
|
0.5 – 3 cN
|
|
TEN-5K
|
1 – 5 cN
|
|
TEN-10K
|
2 – 10 cN
|
|
TEN-12K
|
2 – 12 cN
|
|
TEN-20K
|
5 – 20 cN
|
|
TEN-30K
|
5 – 30 cN
|
|
TEN-50K
|
10 – 50 cN |
|
TEN-60K
|
10 – 60 cN
|
|
TEN-70K
|
10 – 70 cN
|
|
TEN-120K
|
20 – 120 cN
|
|
TEN-170K
|
50 – 170 cN
|
|
Wherever during processing, yarns and threads are subject to load, they should be checked by means of the yarn tensionmeter. This control should take place during spinning and winding, followed by check during warping, especially if high speed warping equipment is used, and during weft winding. On the latter especially, repeated checks of the yarn tension should be made. The tensions obviously depend on the material and the process.However as a good rule of thumb one can take 1/10 of the yarn weight in Deniers, for the mean graduation on the scale.
|
|
Operation: The ZIVY yarn tensionmeter is designed for single hand use. The thread runs over two rollers, which, to reduce the friction, are mounted on miniature roller bearings. Holding the instrument with the right hand, as shown on the illustration, the inner pulley is brought into contact with the yarn to be measured, keeping the yarn parallel to the lever on top of the instrument. The outer pulley is then pivoted to ist stop by depressing the lever. The inner pulley then takes a position which represents the balance between the tension of the yarn and the main calibration spring in the meter. This position, by means of a precision gear, is transmitted to the indicator hand which shows the yarn tension on the dial of the instrument. The reading is in grams. The maximum as well as the minimum tension should be read, the indicator hand following the periodic variations in the tension.
|
|
Code No.
|
196070
|
|
Description
|
Hand Tensionmeter ZIVY
|
|
Gross weight
|
with case 260 gr.
|
|
Operation
|
Singl hand operated, measuring range 10 - 50 cN
|
|
Threading
|
Over two rollers
|
Available Models
|
196000
|
TEN 3K
|
Hand Tensionmeter ZIVY
|
|
196010
|
TEN 5K
|
Hand Tensionmeter ZIVY
|
|
196020
|
TEN 10K
|
Hand Tensionmeter ZIVY
|
|
196030
|
TEN 12K
|
Hand Tensionmeter ZIVY
|
|
196040
|
TEN 20K
|
Hand Tensionmeter ZIVY
|
|
196050
|
TEN 30K
|
Hand Tensionmeter ZIVY
|
|
196070
|
TEN 50K
|
Hand Tensionmeter ZIVY
|
|
196080
|
TEN 60K
|
Hand Tensionmeter ZIVY
|
|
196090
|
TEN 70K
|
Hand Tensionmeter ZIVY
|
|
196100
|
TEN 120K
|
Hand Tensionmeter ZIVY
|
|
196110
|
TEN 170K
|
Hand Tensionmeter ZIVY
|
產品關鍵字：
