HQML2 脈衝雷射
HQML2
脈衝雷射
Temperature-stabilised Laser Diode Module
廠牌：德國(脈衝/連續)雷射
供應商：敦亞有限公司
聯絡電話：02-8646-4129
| 快速詢價 |
行動條碼QR Code
For more information, please contact
Wayne Chiu, [email protected] HP#0910-258301
Line ID: 0910258301
Laser diode module with fiber output ( similar to HQML2 )
General datasheet is attached.
Wavelength: 1310nm
Power out of the fiber: >=300mW CW
Fiber: single mode, length 1m, jacket 900um PVC, connector FC/PC
Modulation: TTL, to 2MHz
Pulse width: 10-20ns ( best effort )
Op. voltage: 5VDC or 110/240VAC using wall-plug adaptor.
Dimensions: about 100mm 80mm 20mm
Temperature-Stabilised Laser Diode Module
|
405nm…1600nm |
|
|
Optical power output (25°C) |
5mW to 500mW |
|
Mode structure |
SM, MM |
|
Operating mode |
CW, Pulse |
|
Beam dimensions at output |
£5mm |
|
Beam divergence (full angle) |
> 0,3mrad |
|
Beam shape at the optic output |
round/elliptic |
|
Beam shape at the distance |
round/elliptic |
|
Polarization |
>100:1 |
|
Focus |
Fixed, adjustable |
| Beam pointing stability (constant temperature) |
<0,1mrad |
| Boresighting |
<8mrad (<2mrad* on request) |
| Wavelength stability (0+40°C) |
<0,2nm |
|
Power output stability (0+40°C, 2h) |
<1% |
|
Noise (RMS, 10Hz – 50MHz) |
Typ <0.1%1 |
|
Operating voltage |
5V ± 10% |
|
Temperature monitor signal |
+, analog |
|
Power output monitor signal |
+, analog |
|
Operation time monitor signal |
+, analog |
|
Power ON LED |
+ |
|
Failure LED |
+ |
|
Operating current |
<2A |
|
Modulation
532nm |
External digital (TTL) - 10MHz External analog - 1 MHz External digital (TTL) – 30KHz |
|
RWE |
Better l/20 |
|
Reverse polarity protection |
+ |
|
Soft-switch |
+ |
|
ESD protection |
2kV |
|
Warm-up time |
<15sec |
|
Operating temperature band |
-10 to +50°C |
|
Vibration |
|
|
Dimensions ( L x H x W ) |
175mm x 52mm x 46mm |
|
Optics |
glass, AR-coated |
|
Housing and power supply electrical connection |
electrically isolated |
-
Manufacturer reserves the right to amend the specification without prior notice. �h
-
Dimensions are indicated for elliptic beam shape. �h
-
Final specification has to be confirmed at the order acceptance.
