大台北尖端儀器有限公司

NG-1L 氮氣體產生器

NG-1L

氮氣體產生器

Nitrogen Gas Generators

廠牌:Labgas/Finland
供應商:建成科學儀器股份有限公司
聯絡電話:02-29103818
定價:與我們聯絡

快速詢價

4898

行動條碼QR Code
氮氣體產生器-行動條碼QR Code

NITROGEN GENERATORS

Ambient air is compressed in an air-cooled compressor, that can either be integrated to the generator, or be as a separate compressor.
Compressed air, free from moisture and oil, is led into the unit, and flows through the carbon molecular sieve (CMS) beds, where oxygen, carbon dioxide, moisture and some hydrocarbons are adsorbed, and a stream of clean, dry, high purity nitrogen gas leaves the adsorber beds to a storage tank. During the CMS beds regeneration period, when the beds are depressurized to ambient pressure, nitrogen is taken from the tank.
The technology is called pressure swing adsorbtion (PSA).
The adsorption / desorption cycle is controlled by a microprocessor controller. Nitrogen flow and purity are factory set prior to shipment of the system, to meet customers requirements.

 

機器型號及技術規格 / Technical Specifications:
Model NG-1L NG-2/3/5L NG-10L NGLCMS
Dim (WxDxH) mm 320x470x830 320x470x830 320x470x830 2 x 320x470x830
weight kg 48 120 140 2 x 140
Inlet Air demand, Temp 20°C, Dew P +4°C LPM 2 4/6/10 20 LCMS
Flow cc/min 0-1,000 0-5,000 0-10,000 0-40,000
Purity (%N2) 99,9995 99,9995 99,9995 LCMS
Dew Point N2 -15 to -70 depending on flow
Inlet / Outlet pressure barg 8 / 7 8 / 7 10 / 7 LCMS
Power Rating, control electronics, W / noise level 8 W / <55dB at 1m
In/Out Connections, Compression Fittings 4 mm 6 mm 6 mm LCMS
Electrical:

110-230 V / 60- 50 Hz

Nitrogen Generator Feed Air Quality:
  • Use only air from an oil free compressor or air from a compressor filtered to ISO 8573.1, Class 1.2. Dirt, Water, Oil.
  • Oil in the feed air will permanently damage the generator.
  • For Nitrogen Generator, minimum pressure requirement is 8 bar.
  • Jun-Air Oil-less Air Compressure

LABGAS 氮氣體產生器之操作原理:

LABGAS INSTRUMENT CO OY NITROGEN GENERATORS WORKING PRINCIPLE

Nitrogen generators
Carbotech in Germany produces specially treated carbon based molecular sieve bed material, that is used to trap gases from passing air. Carbotech technology is based on a PSA-method, as described below.

Air is directed alternating into the two carbon molecular sieve (CMS) filled cylinders, where oxygen is trapped by the molecular sieve, and clean nitrogen exits system.

The other cylinder is working, while the other cylinder is being regenerated by flushing it with clean nitrogen. The operation is guided by changing the direction of the gas flow.

您也可能對以下商品有興趣...

產品關鍵字:

大台北尖端儀器有限公司

最新廠商動態!

OMEGA ENGINEERING ;OMEGA代理;熱電偶接頭;熱電偶線;感溫線;偉吉達;
WHATMAN代理空氣採樣濾紙;玻璃纖維濾紙;G/A GF/B GF/C暨相關過濾素材; 2020 Cytiva代理Whatman濾膜及耗材;
不銹鋼三層推車;不銹鋼二層推車;實驗室推車;歡迎同業洽詢;
BROOKS質量流量控制器;PC540;BROOKS代理;質量流量控制器;BROOKS 5850E;
OMEGA ENGINEERING ;OMEGA 代理商;熱電偶接頭;熱電偶導線;熱電偶公母接頭;熱電偶感溫線;

更多

最新儀器!

力明儀器有限公司

Copyright © 2006-2017 tw17 All rights reserved.
Design: 台灣儀器網

台灣儀器網Tw17 行動條碼QR Code