Highly-modular process industrial titrator that manages sampling and analysis phases automatically. Performs multiple measurements simultaneously (from a maximum of 6 sampling lines) and can be programmed to perform different types of analysis on each line.

In addition to giving analysis results, it can also print, store, communicate error status and transmit.

Technical Specifications:

pH measurement: 0...14pH +/- 0,1 pH unit

Redox measurement: 0...2000mV +/- 1 mV (Ag electrode or PT)

Conductivity measurement: 0...20mS +/- 0,1mS (Cell with 2 or 4 electrodes)

Selective ions measurement: Depending on the specific electrodes required

Concentration measurement: 1.3330...1.5200 D with "USER" scale that can be set from keypad

Line pressure: 1...6bar (14,5...87psi) at 20°C

Product temperature: 0°C...+45°C with automatic compensation
of temperature measured by means of incorporated temperature sensor Pt100

Protection category: IP65 in accordance with EN60529

Conformity: CE mark shows conformity to EU Directives

Supplies:
AC 115/230V +/- 10% 50...60Hz 300VA
Dehumidified air 6...10bar (87...145psi)
Water 1.5...4 bar (22...58 psi)

Interfaces:
- 6, 12, 32 outputs 4...20mA configurable (optional)
- Serial RS232 + RS422
- 6"External Start" inputs; 3 outputs x alarm
- 6, 12, 18 outputs for control Unit (optional)

Features:
- FIP alphanumeric Display with 2 lines x 40 characters
- Dispenser panel expandable up to 8 pumps and 3 Syringes
- Measurement by means of single or combined Electrodes
- Multiparametric Analysis by means of completely customizable Titration
- Concentration Measurement by means of Digital Refractometer (optional)
- Periodic automatic self-calibration
- Possibility of sampling up to 6 different lines

Printer: "Ribbon" printer with paper reel and winder, removable on pull-out runners

Dimensions: 900 (b) x 1650 (h) x 590 (p), ~190Kg